Designer white tufted headboard is very pricey and they can be difficult to match your interior. Tufted headboards are surprisingly easy to do yourself with a few simple materials and time. You can make your headboard with the finest fabric or a found material that you can match specifically to your own style and preferences. Place the hollow door on a flat surface and wipe off. Remove any current hardware and discard. Using the drill, six holes make through the door. Use a pattern that you prefer. These holes will be where tufting is created. Remove any sawdust.
White tufted headboard design ideas, distribute the fabric on work surface design downwards. Smooth with your hands to remove any wrinkles or catches in the fabric. Place two layers of Quilter’s platter on top of fabric and smooth. Put the door on a layer of fabric and plate wrap. Pull the fabric over the corners of the door close and fasten with the short gun. Continue until all four corners are secure. Very much like wrapping a gift, pack the sides of the door with fabric and securely with staples on the back of the door. Continue until the entire door is packed and secured. Flip the door to its front.
Then for design and ideas of white tufted headboard, find areas on the door where you had previously bored. Use the ends of scissors, make a small slit in the fabric and plate wrap. Pull the straps through the buttons and put the ends in the hole in the door until they are visible on the back. Pull the strap as tight as you can while making sure the button is right on the fabric side of the door. Using the short gun, secure the tape ends on the back of the door. Continue until all buttons have been secured. Fit the image hanging set on the back of the door according to the manufacturer’s instructions. Pull the wires tight to ensure a fit with the wall for suspension.